Meng, Xiaohui; Wu, Teng; Qiu, Dong
Toughening anti-overswelling semicrystalline polymer hydrogels with ultra-small hydrophobic nanoparticles
Semicrystalline polymer hydrogels (SC-gels) are intrinsically electrolyte tolerant and over-swelling resistant, emerging as promising candidates for applications in solution environments. However, SC-gels with high mechanical strength are usually brittle. In the present work, by introducing ultra-small hydrophobic nanoparticles, highly-stretchable SC-gels (15 times of its original length) with
Cell wall structure and composition is affected by light quality in tomato seedlings
Falcioni, Renan; Moriwaki, Thaise; Perez-Llorca, Marina; Munné-Bosch, Sergi; Gibin, Mariana Sversut; Sato, Francielle; Pelozo, Andressa; Pattaro, Mariana Carmona; Giacomelli, Marina Ellen; Rüggeberg, Markus; Antunes, Werner Camargos
Light affects many aspects of cell development. Tomato seedlings growing at different light qualities (white, blue, green, red, far-red) and in the dark displayed alterations in cell wall structure and composition. A strong and negative correlation was found between cell wall thickness and hypocotyl growth. Cell walls was thicker under…
Effect of Macromolecular Chain Movement and the Interchain Interaction on Crystalline Nucleation and Spherulite Growth of Polylactic Acid under High-Pressure CO2
Li, Shaojie; Chen, Taoyi; Liao, Xia; Han, Weiqiang; Yan, Zhihui; Li, Junsong; Li, Guangxian
Crystallization behavior of polylactic acid (PLA) under CO2 is meaningful due to its effect on foaming behavior during CO2 foaming, while present studies mainly concentrated on overall crystallization behavior. In this study, the effect of CO2 on nucleation and spherulite growth of PLA crystals was in situ investigated separately. During…
Tailoring the pore size and permeability of isoporous membranes through blending with poly(ethylene glycol): Toward the balance of macro- and microphase separation
Yang, Cao-ying; Zhu, Guo-dong; Yi, Zhuan; Qiu, Ya-yu; Liu, Li-fen; Gao, Cong-jie
Isoporous membranes prepared from the combination of self-assembly and non-solvent induced phase inversion (SNIPS) were known for their asymmetric structures that were characterized with an isoporous top layer and porous/interconnected sublayer. This unique feature provides an opportunity to tailor the structure on toplayer and sublayer separately or synchronously by adjusting…
Photo-degradation of polyethylene under stress: A successive self-nucleation and annealing (SSA) study
Liu, Qiang; Liu, Shixiang; Lv, Yadong; Huang, Yajiang; Kong, Miqiu; Yang, Qi; Li, Guangxian
Successive self-nucleation and annealing (SSA) technique based on calorimetry is utilized to reveal the effect of uniaxial tensile stress on the photo-oxidation of high density polyethylene (HDPE). Stress-induced acceleratory and inhibitory effects on HDPE are confirmed by analyzing the newly formed melting peaks at low temperatures and the gradually disappeared…
Physicochemical Properties of the Binary Mixtures of CuII-Containing Chelate-Based Ionic Liquids with Linear Alcohols
Zhang, Songna; Wang, Yongtao; Wang, Xinyu; Yao, Jia; Li, Haoran
Systematic measurements (densities, viscosities, conductivities) combined with small-angle X-ray scattering (SAXS) experiments were performed for binary mixtures of CuII-containing chelate-based ionic liquid (ChIL) with linear alcohols. The experimental results were explained by disruption of alcohols to ionic aggregation of the ChILs. Viscosity deviations (??) of four binary systems all show
Transformation from form II to form I accelerated by oriented lamellae in Polybutene-1
Chen, Jinlong; Wang, Binghua; Sun, Taicheng; Xu, Jianwei; Chen, Jingbo; Zhang, Bin
Promoting the transformation from Form II to Form I in polybutene-1 (PB-1) is deemed to be crucial and demanded for commercial applications. The mechanism of phase transition is previously described in terms of thermal or mechanical stress applied between the crystalline and amorphous regions. Here, we find that the structural…
Microstructure Induced Rigidity of Polysiloxane Yielding Hierarchical Self-Assembly of Alkyl Side Chains
Sarkar, Alok; Negi, Lalit Mohan Singh; Lewis, Kenrick M.; Vasimalai, Nagamalai; Gowd, E. Bhoje; Dasgupta, Debarshi
The influence of a backbone microstructure on the side chain crystallization of a comb-like polymer is analyzed systematically using a tailor-made random versus block siloxane copolymer system. While the side alkyl chains of the random siloxane undergo a stepwise orderdisorder (OD) transition to form well-ordered orthorhombic structure at low temperature,…
Gradient crystallinity and its influence on the poly(vinylidene fluoride)/poly(methyl methacrylate) membrane-derived by immersion precipitation method
Remanan, Sanjay; Ghosh, Sabyasachi; Das, Tushar Kanti; Sharma, Maya; Bose, Madhuparna; Bose, Suryasarathi; Das, Amit Kumar; Das, Narayan Chandra
Herein, phase inversion poly(vinylidene fluoride)/poly(methyl methacrylate) (PVDF/PMMA) microporous membranes were prepared at various PMMA concentration by immersion precipitation method. Increment in the PMMA concentration has a significant influence in the PVDF membrane crystallinity, which is studied by differential scanning calorimeter, X-ray diffractometer, and small-angle X-ray scattering
Crystallization-driven microstructure changes during microphase separation for environment-friendly thermoplastic triblock copolymer elastomers
Ding, Shuangshuang; Fang, Chu; Wang, Xuehui; Wang, Zhigang
A study on the crystallization-driven microstructure changes during microphase separation for a series of high transparent semicrystalline thermoplastic triblock copolymer elastomers (TBCPEs), polylactide-b-polyisoprene-b-polylactide (PLA-b-PI-b-PLA) was conducted in this work. A series of PLA-b-PI-b-PLA TBCPEs with different molecular masses of PI midblock and same molecular mass of PLA end