Kumar, Anaparthi Ganesh; Saha, Sayantani; Komber, Hartmut; Tiwari, Bikash Ranjan; Ghangrekar, Makarand M.; Voit, Brigitte; Banerjee, Susanta
Trifluoromethyl and benzyl ether side groups containing novel sulfonated co-poly(ether imide)s: Application in microbial fuel cell
A new diamine monomer namely 4,4′-((2′,5′-bis(benzyloxy)-3,3′'-bis(trifluoromethyl)--4,4′'-diyl)bis(oxy))dianiline (TADBE) was prepared. A series of sulfonated co-poly(ether imide)s was synthesized using this diamine as one of the co-monomers along with 4,4′-diaminostilbene-2,2′-disulfonic acid (DSDSA) on reaction with a six-membered dianhydride, 1,4,5,8-naphthalene…
Fabrication and investigation of 3D tuned PEG/PEDOT: PSS treated conductive and durable cotton fabric for superior electrical conductivity and flexible electromagnetic interference shielding
Ghosh, Sabyasachi; Ganguly, Sayan; Remanan, Sanjay; Das, Narayan Ch
Promotions of conducting e-textiles are drawing attention for mitigating electromagnetic radiation pollution. Probably it is a huge challenge to gain long-term durable and stable fabric for all-weather outdoor application. In this work, a facile dip coating design has been adopted to fabricate PEG/PEDOT: PSS treated fabric. The high electrical conductivity…
TBAH/Urea/H2O solvent for room temperature wet-spinning of cellulose and optimization of drawing process
Zhang, Jingyu; Wang, Mengdie; Li, Wei; Wei, Wei; Li, Jinyang; Jiang, Man; Wang, Yong; Zhou, Zuowan
TBAH(tetra-butylammonium hydroxide)/Urea/H2O solvent has been applied for the solvent wet-spinning of cellulose, due to its room temperature operation, good stability and spinnability of the cellulose solution, as well as the unconditional string of low DP (degree of polymerization) for dissolving cellulose. Most importantly, it is found that the stability of…
Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages
Cui, Yong; Yao, Huifeng; Zhang, Jianqi; Zhang, Tao; Wang, Yuming; Hong, Ling; Xian, Kaihu; Xu, Bowei; Zhang, Shaoqing; Peng, Jing; Wei, Zhixiang; Gao, Feng; Hou, Jianhui
Broadening the optical absorption of organic photovoltaic (OPV) materials by enhancing the intramolecular push-pull effect is a general and effective method to improve the power conversion efficiencies of OPV cells. However, in terms of the electron acceptors, the most common molecular design strategy of halogenation usually results in down-shifted molecular…
Structure Evolution of Polyethylene in Sequential Biaxial Stretching along the First Tensile Direction
Chen, Qiang; Chen, Dandan; Kang, Jian; Cao, Ya; Chen, Jinyao
Two linear low-density polyethylene samples (PE-A and PE-B), with similar melt index and molecular weight but different molecular structures, were used to explore the structural evolution during sequential biaxial stretching. Only PE-A could be successfully stretched into a film with the biaxial draw ratio of 6 × 6. The interlamellae…
Sustainable network polymer via dynamic metal ionic crosslinks
Wang, Yanjun; Lei, Yuan; Zhou, Changlin; Wu, Bo; Jiang, Yuanyuan; Lei, Jingxin
Incorporating reversible dynamic linkages into the polymer networks endows traditional thermosets with recyclability and reprocessability. However, the facile preparation of recyclable polymer networks with suitable stability and acceptable cost is still a challenge. Among various dynamic linkages, ionic bonds promise a rational dynamic linkage in virtue of suitable stability and…
Organic acids interacting with block copolymers have broadened the window that retains isoporous structures
Zhu, Guo-Dong; Yin, Yu-Rong; Li, Zhen-Nan; Qiu, Ya-Yu; Yi, Zhuan; Gao, Cong-Jie
Evaporation is significantly important for the preparation of isoporous membranes from self-assembly and non-solvent induced phase separation (SNIPS). Unfortunately, the time of solvent evaporation that retains isoporous structures is usually rather short, which causes many challenges to fabricate membranes with repeatable and controllable isoporous structures. In the current work, we…
Effect of side methyl from mixed diamine chain extenders on microphase separation and morphology of polyurethane fiber
You, Gexin; Wang, Jiaqi; Wang, Chunyan; Zhou, Xulin; Zhou, Xiuwen; Liu, Lina
Polyurethane fiber (PUF) can be used as self-adaptive material in the field of nuclear physics and its properties depended on the molecular structure. To explore the effect of side methyl on its degree of microphase separation (DPS) and morphology for PUF, ethanediamine and 1,2-propylene diamine with different molar ratio were…
Simultaneously enhancing of wear-resistant and mechanical properties of polyurethane composite based on the selective interaction of fluorinated graphene derivatives
He, Taijun; Wang, Guitu; Wang, Yixing; Liu, Yang; Lai, Wenchuan; Wang, Xu; Feng, Yiyu; Liu, Xiangyang
Simultaneously enhancing of wear-resistant and mechanical properties of the thermoplastic polyurethane (TPU) is important for its wider application. Herein, fluorinated graphene (FG) was proposed and respectively functionalized by two amine-terminated molecules: aliphatic poly (oxypropylene) diamine (D230) (compatible with soft segment (SS) of TPU), and aromatic phenylamine (PA) (compatible with…
Topochemical polymerization of hierarchically ordered diacetylene monomers within the block copolymer domains
Krishnan, Deepthi; B, Amal Raj R.; Gowd, E. Bhoje
Integration of polymerizable small molecules within block copolymer based supramolecules provides a new strategy to generate functional materials. Herein we report hydrogen-bonding complexes of photopolymerizable 10,12-pentacosadyionic acid (PCDA) and polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP). We systematically investigate how annealing conditions affect the hierarchical ordering and…